MULTILITE Monocrom

PROPERTIES: Mineral glaze/veil based on a complex potassium silicate micro-emulsion, in a water-based dispersion, for use on interior and exterior mineral bases. With an organic material content of less than 5% of total formula weight, in compliance with the German DIN 18363 Standard. Specifically designed for exclusive use on mineral bases, as Multilite Monocrom ends up forming a part of the substrate, due to a process of silification, by chemical bonding, to form a single body that is insoluble in water but highly breathable (SD < 0.02). Can be pigmented using Mixol Óxidos and/or other oxide colours, subject to order. Multilite Monocrom, unlike Multilite itself, unifies the different oxide pigments used in pigmentation, mostly blending them into a unique colour in order to provide a homogeneous tone. Should you wish to make up a glaze colour of your choice, Multilite Monocrom ins transparent and white and is available with a chart of colours and can also be pigmented, using at most 3%-5% of Mixol oxides. Because it does not form a surface film, due to its penetrating qualities, Multilite Monocrom will not alter the texture of the mineral base treated, making this an extremely natural, effective and lasting treatment.

MAIN USE: Multilite Monocrom is used as a penetrating, coloured mineral glaze for absorbent mineral bases, concretes, mortars, micro-mortars, paved floors, façades, heritage work, professional theming, etc.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing, particular glass, metal or lacquered surfaces, wood, etc. Apply Multilite Monocrom using brushes, rollers or an airless spray gun. It must not be diluted with water or solvents. We recommend the application of 2 coats, leaving a drying interval of 12 hours between each coat. Clean utensils immediately after use with solvent. For optimum durability the system can be approved through the subsequent application of FK-7 or FK-3 Plus Nano water-repellent protector. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.

AVERAGE YIELD: Multilite Monocrom provides a yield of approx. 4-6 m²/litre and an average consumption of between 150 and 250 ml/m², although this may vary considerably, depending on how it is applied and the texture and absorption of the base.