by Fakolith Chemical Systems
Descaler detergent cleaner with non-slip effect, on mineral, ceramic and vitrified surfaces. Provides matte surfaces and an additional level of roughness, increasing its degree of wet slip resistance, and thus reducing the risk of slipping.
DESCRIPTION AND MAIN USE: FAKOLITH FK-FIX is a lime-descaling, detergent cleaner for use on mineral, ceramic and enamelled bases that accentuates and provides an additional level of surface roughness, increasing level of slip resistance when wet. Health Register FAKOLITH RGSEAA ES-39.005259/T y ROESP E-0043-E.
RECOMMENDED THINNER: From undiluted on concrete to a ratio of 1:1 with water for other types of surfaces. Where necessary verify the most adequate dilution and the reaction time that best suits the base in question.
HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. FK-FIX is applied diluted, immediately activating the product by scrubbing with a brush with stiff plastic bristles. After the predetermined time for each base has elapsed, in general 15-20 minutes, although always before the product has dried, wash off and rinse thoroughly using water under pressure. If so required the operation can be repeated. During the 15-20 minutes we recommend that you scrub the surface 2 or 3 times. Leave to dry before going ahead with possible additional treatments. For further details consult the specifications sheet and/or application guidelines, along with the safety sheet.
AVERAGE YIELD: Undiluted FK-FIX provides a yield of approx. 8-12 litre/m², although depending on the level of cleanliness required this may vary considerably.
