FK-19 Plus

DESCRIPTION AND RECOMMENDED USES: FAKOLITH FK-19 Plus is a concentrated, multifunction, pure acrylates and polyurethane product in a water-based dispersion that provides a considerable improvement with regard to the protection, impermeability and fixing of construction materials. Easy to apply and handle, compatible with humidity/damp, providing good adhesion to and easy application on absorbent surfaces, both interior and exterior, or to be immersed in water. The versatility of Fakolith FK-19 Plus ensures that it can function as an additive that will improve the specifications of elite mortars, and also as a protective surface binder. Fakolith F-19 Plus can be used for the restoration of façades and heritage work, new buildings, civil engineering in general, construction, professional Theming work , on flooring, for the food industry and the health sector, industry in general, etc. on vertical and horizontal surfaces and even for immersion in saltwater.

HOW TO APPLY AND AVERAGE YIELD-CONSUMPTION ACCORDING TO FUNCTION:

Carefully protect all surfaces that are not to be treated from splashing, and in particular any glass surfaces. The surface to be treated must be clean and free of dust, release agents, paint or any other substance that could affect adhesion. Can be applied at temperatures of 5ºC or over.

• Additive for Elite rendering mortars: FK-19 Plus allows for the application of thick coats of mortar, from 1 to 15-20 cm, that provide plasticity, impermeability and higher levels of physicochemical resistance. Add 1 litre of FK-19 Plus for every 6 litres of the water to be used for the mixing. Consumption of FK-19 Plus is variable, between 0.85 l/m² and 0.90 l/m² for each centimetre of mortar thickness. Consult the data provided in the specifications sheet of the mortar you are going to use.

• Protector - Binder: FK-19 Plus acts as a colourless protector/binder on concrete and metal. Apply either undiluted or diluted to a ratio of 1:3 in water, using a brush, roller or spray gun. The level of dilution and the number of coats will be determined by a number of different factors: porosity, absorption of the surface, level of degradation, pathologies, etc. On concrete floors we recommend a first coat in a solution of 1:3 in water, plus a second coat with a solution of 1:1 in water. For protection of metals apply 2 undiluted coats. For this use FK-19 Plus has an approximate variable yield of between 4 and 10 m²/l, depending on the type of surface.

Following application, immediately clean utensils using soapy water. For more information consult the specifications sheet and/or application guidelines and the safety sheet.