DISPERLITH ELASTIC

PRODUCT SUMMARY: DISPERLITH ELASTIC is a waterproof and elastic hygienic-sanitary paint, widely certified, with high physicochemical resistance in its category, high resistance to humidity and its consequences. Formulated with modified acrylic copolymers in aqueous dispersion, low VOC, free of ammonia, APEO, formaldehyde, phthalates, BPA, heavy metals, polyhaloanisoles and polyhalophenols. Satin finish in interiors and exteriors, excellent coverage, waterproof, adhesion and elasticity, low odor, fast drying and from low temperatures (>3ºC). On open surfaces, walls, ceilings and roofs, indoors and outdoors. Especially in the food industry and healthcare sectors, hospitals and clinics, and also in industry, civil engineering and public and private buildings in general. Available in white, NCS colors and colorless varnish. With Declaration of Conformity, Performance and CE marking.

BIOFILMSTOP SANITARY TECHNOLOGY (Article treated BPR Art.3): DISPERLITH Elastic is a treated paint (BPR Art 3 and 58) with broad spectrum BioFilmStop antimicrobial Technology.  With effectiveness ≥99.9% and tested in various official R&D&I projects and external reference laboratories, under various regulations ASTM D2574-06, ISO 846, ISO 22196, ISO 15457:201, ISO 21702, etc., against bacteria and biofilm (Staphylococcus aureus MRSA, Listeria monocytogenes, Salmonella enteritidis, Salmonella entirca, Pseudomonas aureuginosa, Legionella pnemophila.... ) fungi and molds (Aspergillus niger, Aspergillus brasiliensis, Candida albicans, Chaetomium globosum, Paecilomyces variotii, Penicillium pinophilum, Trichoderma virens...) and viruses (Human Coronavirus, Feline Coronavirus). The paints and coatings of Fakolith's sanitary range contribute to comply positively with CE 852/2004, are manufactured under HACCP and Good Manufacturing Practices (GMP) according to CE 2023/2006, improving hygiene and food and sanitary safety of surfaces and environments.  FAKOLITH Sanitary Registration: RGSEAA ES-39.005259/T and ROESP E-0043-E.

PROPERTIES: Excellent adhesion on multiple surfaces, resistant to weathering, carbonation and alkalinity of the base). Drying starts from 3ºC - 60% humidity. Tests CE marked (Tecnalia) UNE-DIN EN ISO 1504-2:2005 after 28 days cured at 23±2ºC 50±5% relative humidity and average thickness of 285 µm.

• High resistance to attack by commonly used chemical solutions Class I-II.
• Permeability to CO2 Class III Sd >50 m
• Permeability to water vapor Class I Sd<5m
• Liquid water permeability w<0,1 Kg/m²-h 0,5
• Tensile strength for Rigid and Flexible systems without traffic loads =1.30 N/mm2

According to DIN EN 13300:2002 and DIN EN 1062-1 it is resistant to wet rubbing Class 1 (<5 µm), covering Class 1 (>250 ml/m2) and Class 2 (250-125 ml/m2), water vapor transpiration Class V2 (SD= 0.66 [m]), and water permeability Class W3 (W24=0.0062). Estimated Euroclass B-s1, d0.

Paint treated with effectiveness tests against microorganisms (fungi, bacteria, yeasts) according to ISO 22196 and ISO 846 of Eurofins, CNTA and Fraunhofer, also tested as suitable for cleanrooms. Paint resistant to most disinfectants and cleaners according to Test DIN EN ISO 4628-2: 2004-01 carried out by TÜV SÜD Germany and/or Fakolith R&D&I. (In case of doubt, please consult our Technical Department). Paint/varnish tested with GC-MS-MS technique to determine the polyhaloanisoles and polyhalophenols profile in dry film, <0.50 ng/l. without risk of anisoles or precursors, suitable for use in wine cellars (DOLMAR).

HOW TO APPLY: Compatible with most absorbent mineral surfaces, concrete, properly primed metals, lacquered panels and other dispersion paints and/or previous primers well attached and resistant to cut-cross test Class 0-1 UNE-DIN EN ISO 2409:2007.For the proper application of a product, the state and preparation of the base must be considered. The base must be clean, consolidated and with adequate levels of humidity, for which we have a wide range of cleaners, disinfectants, deoxidizers, primers, water repellents, consolidators, insulating agents, mortars, putties. In case of doubt, consult our technical advice service.

Finish with 2 or 3 coats of Disperlith Elastic hygienic paint, applied by roller brush or airless.

CONSUMPTION – PERFORMANCE: Depending on the state and type of base, we recommend between 200-400ml/m², applied in 2 to 3 coats, with a total yield between 2.5 and 5 m²/l.

More information in its technical and safety data sheet, and in the web section solutions and application guides.