RENOLITH FK-32

PROPERTIES: RENOLITH FK-32 special dispersion paint, with a high capacity for covering, based on dearomatised solvents, with 100% pure acrylates, low odour, free of APEO, ammonium, formaldehyde and heavy metals, highly resistant to dampness and humidity, for interior use. RENOLITH FK-32 forms a well-balanced film of paint, highly resistant to stains, easy to apply, quick drying, low odour and providing an excellent finish, in line with the DIN EN 13300 Standard, wet scrub resistance Class 1 covering Class 2 (250 ml/m²), water vapour transpiration Class 1 (SD = 0.11) and water permeability Class 3 (W = 0,03). Paint resistant to the most disinfectant cleaners according to Tests DIN EN ISO 4628-2: 2004-01 by TÜV SÜD Germany and/or Fakolith R&D+i (For more security, before use, ask your case to our Tech. Department). Good adhesion, particularly on mineral or painted surfaces. It could be applied at temperatures as low as 1ºC (free of ice and in dry atmospheres and surface conditions) and up to a maximum relative humidity of 75%. Available in white and other colours, consult possibilities.

BIOFILMSTOP SANITARY TECHNOLOGY (Treated Article BPR Art.3): RENOLITH FK-32 is an intelligent sanitary paint, treated with BioFilmStop Inhibition, highly resistant to biofilm bacteria and mould, DIN-UNE EN 15457:2008 (Aspergillus, Cladosporium, Penicillium, Algae…), as well as bacteria, ISO 22196:2011 (Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa, Staphylococcus aureus, Salmonella enteritidis, Legionella pneumophila...). The paints of the DISPERLITH range positively contribute to compliance with (EC) 852/2004, are manufactured subject to HACCP and GMP (EC) 2023/2006, also notably improving HACCP, food safety and asepsis for the user company. With Statement of Compliance – Health Register FAKOLITH RGSEAA ES-39.005259/T and ROESP E-0043-E.

RECOMMENDED USE: RENOLITH FK-32 is mainly recommended for use in the renovation of interior walls and ceilings that suffer from stain problems, where a rapid, low odour application is required. Compatible with most surfaces, duly primed should such be required, and to cover well-adhered previous coats of dispersion or priming paints, resistant to cross-cut test Class 0-1 UNE-DIN EN ISO 2409:2007. Particularly recommended for use in severe industrial, climate or sanitary conditions, for the food industry, health sector, and pharmaceutical or cosmetics industry in general, construction and civil engineering.

HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application can take place at ambient and surface temperatures as low as 2-3ºC and up to a maximum relative humidity of 75%. RENOLITH FK-32 should be applied undiluted, in two coats, using brushes, rollers or airless spray guns. The surface must be clean, free of hygroscopic salts, microorganisms, etc. and, should such be required, duly primed. Do not apply the second until the first coat has lost its wet sheen and is dry to the touch (in normal conditions, of around 20ºC with a humidity of around 60%, this will be in approx. 2-3 hours). The cleaning of utensils, or thinning if required, can be done using the foodgrade FK-45 OEM SOLVENT or FK-37 dearomatised solvent. For more information consult the specifications sheet and/or application guidelines, and the safety sheet.

AVERAGE YIELD: RENOLITH FK-32 has a yield of approx. 3-5 m²/l, applied in two hands although this can vary considerably, depending on how it is applied and the texture and absorption of the surface it is applied to.